A simple circuit was designed to handle the existing control input from the car. When flashing with the low beam off, activate the halogen and its projector shutter. But when low beam is on, high beam or flash activates the bi-xenon shutter. Schematic as follows Circuit produced Another set of relay is used to convert …
Category Archive: auto-lighting
Jun
27
LED angel eyes installation
Angel eyes installed The replica shroud was hacked thoroughly to fit the angel eyes. No modification to the OEM shroud Initial hack Whats left of the shroud It turns out that double-sided tape is not good enough so the angel eyes are JBed (JB welded)
Jun
25
Installing projector assembly into housing
Headlights out of car AL (Automotive Lighting) logo Bulbs and holder out Grey holder for low beam, black for high beam Bowls out, I did it by removing the black plastic then clipping off the levelling servo from the front Angel eyes out Fitting test FX-R projector is mounted in the bowl with two screws. …