The bezel arrived in the week as expected, it looks great and the finish is good enough that I’m happy to install it without respraying. An expected hack is required to fit the screen to the bezel as the bezel is intended for double din. The lcd is held onto the frame with epoxy. After everything was fine, wiring harness was done and the computer was installed into the car. Everything work the first time without much drama. The CPU is installed in the glovebox so a hole had to be cut to fish wire through. Okay, now to pictures.
the LCD removed from the frame
wiring harness
ta da
things that couldn’t be tested on the bench, GPS NMEA stream is transfered from 205W via GPSgate. Ibus interface works like a charm.
